Woodall Steels - West Midlands Specialist Steel Stockholders

We handle every order as if our future depends upon it - because we know that it does!

Click for Google Map
Credit Cards Accepted
Woodall Steel Stockholders

All the steel you ever need

Click here to download the datasheet below as a PDF file

BS 970 PT1 (1983) BS970 (1955) (NEAREST) Woodall Steels Colour Code  
230M07 EN1A Blue (Imperial)
Magenta (Metric)
A RE-SULPHURISED "FREE CUTTING" STEEL WIDELY USED IN AUTOMOTIVE AND GENERAL ENGINEERING PRODUCTS REQUIRING A GOOD SURFACE FINISH.
230M07 PB EN1A Leaded Green
A "LEADED" VERSION OF THE ABOVE. THE ADDITION OF LEAD HELPS LUBRICATE CUTTING TOOLS AND THEREFORE ENHANCES TOOL LIFE AND AIDS MACHINABILITY.
070M20 EN3A/EN3B Controlled White (Imperial)
Orange (Metric)

A .20% CARBON STEEL FOR GENERAL ENGINEERING PURPOSES, COMBINING WELDABILITY WITH REASONABLE MACHINABILITY. A GOOD ALL PURPOSE "MILD STEEL".

080M15 EN32B White (Imperial)
Orange (Metric)
GENERAL PURPOSE MILD STEEL COMBINING REASONABLE WELDING/MACHINING CHARACTERISTICS WHILST ALSO BEING CAPABLE OF BEING CASE HARDENED.
080M40 EN8 Red
A 40% MEDIUM CARBON STEEL USED WIDELY IN THE MANUFACTURE OF GEARS/SHAFTS/CAMS/BOLTS/STUDS etc. CAPABLE OF THROUGH HARDENING AND SURFACE HARDENING.
212A42 EN8DM Red/Silver

A FREE MACHINING VERSION OF O8OM40. SUITABLE FOR GEARS/STUDS/SHAFTS etc. HIGHER SULPHUR AND MANGANESE CONTENTS AIDS MACHINABILITY AND TOOL LIFE.

070M55 EN9 Black

A .50% CARBON VERSION SIMILAR TO 080M40 SUITABLE FOR THROUGH HARDENING/FLAME & INDUCTION HARDENING. USED FOR SHAFTS/CAMS/ROLLERS/CYLINDERS.

150M19 EN14A Black/White
A WELDABLE CARBON/MANGANESE STEEL GIVING A HIGHER TENSILE STRENGTH THAN 070M20. USED FOR LIFTING GEAR/SHAFTS/PLUGS etc.
605M36 EN16 Blue/White

A LOWALLOY THROUGH HARDENING STEEL USUALLY SUPPLIED IN THE HEAT TREATED CONDITION. APPLICATIONS INCLUDE BOLTS/NUTS/STUDS/SHAFTS/GEARS etc.

606M36 EN16M Blue/White

A RE-SULPHURISED VERSION OF EN16 GIVING IMPROVED TOOL LIFE AND CYCLE TIMES. USUALLY SUPPLIED IN HARDENED AND TEMPERED CONDITION FOR STUDS/GEARS/BOLTS/SHAFTS

708M40/709M40 EN19 Green/White

A .10% CHROME-MOLY STEEL CAPABLE OF SURFACE/DIRECT/THROUGH HARDENING AND ALSO NITRIDING. APPLICATIONS INCLUDE BOLTS/NUTS/SHAFTS/GEARS AND FASTENERS.

817M40/817M40T EN24 ANN
EN24T
Blue/Green (ANN)
Red/Green (“T”)

A 1.5% Ni-Cr-Moly STEEL CAPABLE OF THROUGH HARDENING TO A VARIETY OF RANGES. APPLICATIONS INCLUDE SHAFTS/GEARS/STUDS/NUTS/BOLTS/SPECIAL FASTENERS.

665M17 EN34 Black/Red

A Ni-Moly CASE HARDENING STEEL CAPABLE OF ACHIEVING A HIGH WEAR RESISTANT CASE COMBINED WITH A TOUGH CORE. USED FOR CAMS/GEARS/SHAFTS/COLLETTS.

665M13 EN36A Yellow

A 3.25% Ni-Cr CASE HARDENING STEEL CAPABLE OF ACHIEVING HIGH WEAR RESISTANCE AND A TOUGH CORE. USED FOR GEARS/CAMS/SHAFTS/ROLLERS/BUSHES.

210M15 EN32M Yellow/Blue
A "SEMI-FREE CUTTING" CASE HARDENING STEEL GIVING
IMPROVED MACHINABILITY. USED FOR HIGH VOLUME PRODUCTION
OF ROLLERS/PINS/SPROCKETS etc.
SAE 8620 (U.S.A.) EN362 (NEAREST U.K.) Black/Green
A LOWALLOY AMERICAN CASE HARDENING GRADE WHICH AFTER CARBURISING GIVES A WEAR RESISTANT CASE COUPLED WITH A TOUGH CORE. USED FOR GEARS/CAMS/SHAFTS.

All content on this website is copyright © Woodall Steels Ltd 2009

Bright Bar, Hot Rolled and Forged Bar, Hot Rolled Sections, Galvanised Bar, Aluminium, Tool Steels, Stainless Steel, Accurate Cold Sawing, Steel Shearing, Electro Zinc Coating, Galvanising, Sheared Strip and Blanks.

EVERY CARE HAS BEEN TAKEN IN THE PREPARATION OF THE INFORMATION PRESENTED. HOWEVER NO LIABILITY CAN BE ACCEPTED FOR ERRORS OR CONSEQUENCES ARISING. FOR FURTHER DETAILS PLEASE REFER TO THE RELEVANT STANDARD.

Web design and hosting Sant Media